Causes and ways to eliminate inflexible rotary bearings 

For mechanical products, a swivel bearing is an indispensable part, but sometimes we will find that it will seem inflexible, if it is not flexible, there will be many problems in using time, and there is no way to work well, today Jinan Vansyantun LLC to share with you a rotary bearing of stagnation or inflexible reason for movement and solution.

1. The deformation of the gear of the rotary bearing or broken teeth caused by stagnation or inflexible movement. Corresponding solutions: gear repairs, re -welding gears.

2. The system of compaction of the supporting device has problems that will lead to garbage, such as stones, sand, etc., caused by stagnation or insensitive movement. Corresponding decision: Clean all the fragments.

3. Work with overload, as a result of which the movement of the rotary bearing is not flexible. Corresponding decision: it is necessary to reduce the workload.

4. The position of the bearing is not even. Corresponding solution: it is necessary to replace the platform, work in a flat position.

5. The rotary bearing is not enough lubricant oil, lubricants caused by friction increases, the resistance becomes greater, this will lead to the movement are not sensitive.

Corresponding solution: Add a lubricant of the same specification or replace all lubricants. Knowing the rotary bearing is not a flexible reason and solution, and then encounter this situation, we should not worry. For the user, in addition to the need to own this knowledge, it is also necessary to understand precautions when using the supporting device and the corresponding methods of service.